Custom filtration systems, engineered to your plant.
EdjeTech designs and manufactures filtration and recovery systems for coolant, oil, and wastewater when no standard unit is configured for the fluid, flow rate, contaminant, or footprint. The systems are engineered and built in-house in Ohio to your specification.
- Designed & built in-house
- EdjeTech engineers and manufactures its own equipment in Ohio
- Coolant · oil · wastewater
- industrial fluid and waste-stream applications
- Combine · modify · scale
- integrated stages, adapted equipment, application-specific capacity
- Since 1985
- four decades engineering filtration to spec
Engineered beyond standard configurations
Custom systems address fluid, contaminant, flow, capacity, or footprint requirements outside the standard equipment configurations.
- 01An unusual fluid or contaminant that no off-the-shelf unit is configured for, including wastewater and mixed waste streams.
- 02A footprint or layout constraint that a standard system will not fit, or that calls for a modified tank or skid.
- 03A combination of stages in one system, such as a centrifuge paired with an oil/water separator, or a separator with an integrated heater.
- 04A flow rate or capacity beyond the standard range, or a transfer and storage need built into the same package.
Custom filtration equipment for process-specific requirements
EdjeTech combines and adapts established separation, filtration, transfer, and thermal-control technologies to meet the required duty.
- 01
Heavy-load recovery
Centrifuge and oil/water separation in sequence for a contaminant load requiring two separation methods.
- 02
Recover and return
Oil/water separation with clean-fluid storage and return integrated into one package.
- 03
Sump-side ferrous removal
Machine-reservoir modifications that integrate magnetic separation for in-place ferrous-fines removal.
- 04
Corrosive-duty separation
Stainless steel oil/water separation with integrated heating for corrosive-fluid service.
- 05
Wastewater ultrafiltration
Ultrafiltration configured around the incoming industrial wastewater stream.
- 06
Staged fine filtration
Multiple process stages arranged for progressively finer filtration within one system.
How a custom system is specified and built
- 01
Discuss your needs
Describe the contamination you need removed or the installation constraint a standard unit cannot meet. An engineer develops the equipment requirements with you.
- 02
Engineering assessment
EdjeTech evaluates the operating requirements and determines whether a standard configuration or custom system is appropriate.
- 03
Designed and built
The system is designed and manufactured in-house in Ohio to the agreed specification.
- 04
Startup and support
EdjeTech provides startup assistance, replacement parts, and technical support for the completed system.
Fit filtration into the space you have
Address contamination your existing equipment cannot handle, with filtration built around your process and available space.
- Custom equipment
Talk to an engineer
Remove contamination within the space and process constraints you already have.
Talk to an engineer → - Already running an EdjeTech build
Parts and support
Use the model and nameplate number to confirm available media, parts, manuals, and technical guidance.
Go to support → - Standard equipment
All products
Review standard coolant recycling, filtration, separation, and fluid-management equipment.
Browse products →